elneos five EN

Outstanding technical features of the precision of elneos five Precise pre-specified set point of current and voltage by a high-quality 14BitD/A-Converter Resolution: Iset approx.1mA with current range 5A Uset approx.1mV with voltage range 30V Precision measuring device of current and voltage by a high-quality 16BitD/A-Converter Resolution: Inominal approx.1mA with current range 5A Unominal approx.1mV with voltage range 30V Zoom function of the ramp functions By the capacitive 7"multitouch display the X-Ychart can be zoomed viz. enlarged or scaled down at the desired place with 2-finger contact. In addition, elneos five has a repeat function of the programmed ramps from 1 to unlimited. Safe-Start function (safety start) Due to a digital interface outputs can be connected at a desired point of time. Safe-Condition function (safety cutout) This function is released by 4-finger contact. By simply wiping with 4 fingers from top to bottom, the device immediately switches off all output and the nominal values are zeroized. Thus, dangerous situations at the working place can be avoided in due time. Programmable OVL and OCL function OVL = Over voltage limit OCL = Over current limit With the telecontrol the values can be prespecified. The user can then operate only within the prespeci- fied limits. Measured values by real-time measurement Ramp functions as well as arbitrary functions are time-critical and complex processes. Due to its circuit technology elneos five is able to implement these processes autarkically within the control card so that the transfer rate of the interface has no influence on these processes. Data logger An integrated data logger allows the storage of up to 2000 measured values per channel. The 4 channels can simultaneously visualise 4 different measured values. The measured values can be read out by means of an interface. Quick and efficient stepwise pre-regulation Due to the new software-based winding converter, the power loss is considerably reduced. The multi- stage pre-regulation works independently of the output voltage and reduces the voltage through the series pass transistor. With this new development, the advantages of a power regulating power pack can be used with high precision and without the previous disadvantage of heat development. Thus, the devices have a compact design and excellent temperature coefficients. The service connect is increased and the environment is not influenced. Therefore, it is possi- ble to integrate more functions and further devices in a small space. Great dynamic – arbitrary signals up to 1kHz: By activating the output and already defined demand, the output within 12 µs is controlled stable. Thus the prerequisite for high loaded arbitrary signals up to 1kHz is created. The new measuring and control card has a high independent intelligence and allows real-time mea- surement of current and voltage. Maximum measuring rate: depending on device configuration approx.10 to 20 measurements per second with a high resolution. 42 | elneos® five elneos five – experience the touch Precision regulating power supply unit Limiter The limiter offers programmable limits of the current and voltage ranges for 8 digital outputs. The limiter allows programming below, within and above the area.Thus, 3 user-defined outputs for 3 conditions can be programmed and can, for instance, control the indication light.

Seitenübersicht