elneos five EN

Technical data and characteristics Modulation • Freely programmable modulation due to 2 integrated function generators; • Freely programmable carrier signal (carrier) – generator1; • Freely programmable wanted signal (modulation) – generator2; • All signal shapes, frequencies, amplitudes, etc. are available; Modulation depth: 0 to100% 0 % modulation depth means: At AM the modulated signal reaches with the maximal point the amplitude of the carrier signal.The amplitude height of the carrier signal is changed according to the wanted signal. At FM the modulated signal reaches with the maximal point the frequency of the carrier signal. The frequency range of the carrier signal is changed according to the wanted signal. With PWM the modulated signal reaches with the maximal point the duty factor1. The duty factor is changed from 0 to 1 according to the wanted signal. Frequency sources 2 function generators which are programmable independently of one another; the technical data apply to each function generator. Amplitude Amplitude resolution for all shapes: 14 Bit (16.384) Output: 30 Vss, 50 Ω of 0-20 MHz, 1.8mV resolution Input: 20 Vss, 50 Ω of 0-40 MHz, 1.8mV resolution Trigger pulse Externally through BNC connector; Internally through menu for defined signal start; Adjustment range Frequency: 100 mHz up to 40 MHz!, resolution 1µHz Amplitude: 0 to 30 Vss ±0,5 dB +1mV of the adj. value Pulse duty factor rectangle: 0 to100% in steps of 0,1% Offset: 0 to ±15.000 V Outputs BNC laboratory connectors with disappearing effect; Output: up to 30Vss idle Output: 5VTTL compatible Frequency characteristics Sine wave: 1µHz to 40MHz! Rectangle: 1µHz to 5MHz Saw tooth: 1µHz to 5MHz Pulses Single pulse: single and multiple pulse up to 999s Burst operation at will through parameters: Pulse and pause times: up to 999s Number of repetitions: 1to∞ Frequency counter Measuring range: up to 1GHz optional up to 1,5 GHz (Ref. No. EL5.F1G) Input voltage: 100mVeff to 5Veff Distortion factor Sinus: 0 MHz to 1 MHz < 1% Sinus: 1 MHz to 20 MHz < 5% Sinus: 20 MHz to 40 MHz < 6% Inputs BNC laboratory connectors with disappearing effect; Input: Counter input for external input signals up to 1,5 GHz (Ref. No. EL5.F1G); Input: Trigger input for defined signal start; Input sensitivity: 100mVeff x % modulation depth means: At AM the amplitude of the modulated signal is reduced on a percentage basis. At FM the frequency of the modulated signal is reduced on a percentage basis. At PWM the duty factor of the signal is reduced on a percentage basis. 4 Modulation types (carrier and wanted signal): • Amplitude modulation (AM) • Frequency modulation (FM) • Pulse width modulation (PWM) • Sweep modulation (special kind of FM) Duty factor: 0.1 to 99.9% Trapeze: 1µHz to 5MHz Triangle: 1µHz to 5MHz Ramp: 1µHz to 5MHz 52 | elneos® five elneos five – experience the touch Function generators incl. counter

Seitenübersicht