elneos five EN

elneos® five | 47 Precision digital multimeter, 5¾ digit Ref. No. EL5.D (further order information see p. 58) elneosfive allows the acquisition of currents of up to 40A and voltages of up to 1000V. Due to intelligent additional functions such as capacity measurements, RC meters can be replaced. With an integrated diode test and with temperature and frequency measurements, the multimeter of elneos five is an absolute all-rounder. Due to the use of TRMS converter modules of considerably improved linearity and band width, an excellent measurement precision with the outstanding crest factor 5 is possible. Technical data and characteristics Display: 5 ¾ digit, display range 40.000 points Voltage measurement DC: up to 1000V; 1µV; ± 0.08% + 5dgt. Voltage measurement AC: up to 750V (peak 1060V); 1µV; ±0,5% +10dgt., band 20Hz up to 2kHz Current measurement DC: up to 32A cont. current (temporarily til 40A), 100nA; ± 0.15%+5dgt. Current measurement AC: up to 32A cont. current (temp. til 40A), 100nA; ± 0.8%+10dgt., band 20Hz til 2kHz Resistance measurement: up to 40MΩ, 1mΩ; ±0.5%+10dgt. Capacity measurement: up to 400nF/4/40/400/4000µF; 1pF; ±1.0%+10dgt Inductance measurement: 400mH; 10µH; ±2.0% +10dgt. Temp. measurement: -200 up to +600°C, dependent on sensor, resolution 0,1°C Precision: class B to EN 60751 Pt 100 sensor or Pt 1000 sensor suitable for connection (automatic detection) For all measurements: AUTO-RANGE Frequency measurement: up to 40 kHz,1Hz; ±0,05%+5dgt; high resolution: small metering speed True-RMS function: real effective value measurement; Crest factor: 5 with non-sinusoidal signals. Further characteristics: Diode test, Continuity test Limit values: Limits of all measured values are programmable. Digital output: When exceeding or falling below the measured values, a digital output is triggered. Digital input: Start of measurement by trigger pulse of the input (flank control) Data logger: The 4-channel operation allows the storage of 2000 measured values per channel. The values are recallable graphically and can be read out by means of an interface. Measured value representation: X-Y graph available and scaleable by 2-finger contact; ideal for the quick acquisition of changes (long-term measurements). Simultaneous acquisition of current and voltage (AC/DC) (optional, Ref. No. EL5.DUI) The digital multimeter facilitates the graphical display of the present and stored measured values by means of X-Ygraphs. When exceeding limit values, a digital output can be set. An external circuit can react to dangerous situations, if need be, and can deactivate the corresponding peripheral equipment. The multi- meter is integrated directly behind the laboratory connectors which saves space and does not require a separate plug-in position for the internal backplane. The new digital multimeter facilitates the acquisition of non-sinusoidal signals of an unequalled precision. Voltage measurements of a precision of ±0.08% and a resolution of 1µV are proof of the outstanding accuracy.

Seitenübersicht