elneos five EN

elneos® five | 55 Technical data and characteristics Frequency sources 2 Function generators independently programmable; Memory depth: 524.288 scanning points (512kwords) Memory cells: 2pcs. for 2curves Pulses Single pulse: single and multiple pulse up to 999s Burst operation at will through parameters: Pulse and pause times: up to 999s Number of repetitions: 1to∞ Amplitude Amplitude resolution for all shapes: 14Bit (16.384) Output amplitude: 30Vss idle, 1.8 mV resolution Inputs BNC laboratory connectors with disappearing effect; Input: Counter input for external input signals up to 1,5 GHz (Ref. No. EL5.F1G); Input: Trigger input for defined signal start; Input sensitivity: 100mVeff Pulse-duty factor: 0,1 bis 99,9% Frequency characteristics Sine wave: 1µHz to 40MHz! Rectangle: 1µHz to 5MHz Saw tooth: 1µHz to 5MHz Trapeze: 1µHz to 5MHz Triangle: 1µHz to 5MHz Ramp: 1µHz to 5MHz Frequency counter Measuring range: up to 1GHz optional up to 1,5 GHz (Ref. No. EL5.F1G) Input voltage: 100 mVeff to 5Veff Trigger pulse Externally by BNC connectors; Internally by menu for defined signal start; Outputs BNC laboratory connectors with disappearing effect; Output: up to 30Vss idle Output: 5VTTL compatible Fast signal arbitrary generator (incl. 2 function generators and counter) Ref. No. EL5.S (further order information see p. 58) Due to the additional arbitrary function any curve forms can be generated besides the standard signal forms. For generating the signals there are 2 curves of 4096 scanning spots. Two signal forms can be stored and called up. Through the telecontrol software highlink Power curve forms can be generated at the PC in graphical or tabular form and can be transferred to the device. With the software highlink Power complex signals of the vehicle electrical system or the telecom- munication engineering can be easily copied. highlink Power allows to read-in and to convert a signal which was acquired by the oscilloscope so that the support points can be transferred to elneos five directly. Innovative connection panel The panel is called up by a swiping movement. It gives information about possible connections and which devices are built-in. In setup mode it is possible to select whether the panel should be overlaid at each switching-in operation. Freely programmable modulation By using the arbitrary function as wanted signal and the freely programmable carrier signal, further degrees of freedom are achieved. With this solution all signal shapes can be modulated and the carrier signal can, for example, be modulated with the arbitrary signal. All modulation kinds and characteris- tics conform to the afore described function genera- tor. In the field of motor vehicle electronics and other electronic sectors, this functionality guarantees the reproduction of the desired signal shape. Unrivalled achievement potential When combining this quick arbitrary function generator with the power arbitrary generator for high electrical output signals of the regulating power supply units, all imaginable simulations, tests and measurements of power electronics and the fast signal electronics can be carried out with one single device. If in addition the efficient digital multimeter with power meter has been chosen, a complete measuring station can be replaced by one single measuring device. All these functionalities are essential modules for training and the industry.

Seitenübersicht